...

1. Connect the Rutoken EDS device to the computer.
2. Open Device Manager.
3. Double-click on the Smart cards line. As a result, the line Aktiv Co. Rutoken Minidriver should be displayed.
4. If this line is displayed, the minidriver is installed.
5. If not, repeat the installation process.

Remote access to VPN networks

For the configuration you need a computer with the Windows 10 Rus operating system and Rutoken drivers installed.

When establishing a remote connection to a remote access server, the client is authenticated by the server, and, vice versa, the client verifies that the connection is made to the needed server. However, it is possible to disable the verification of the server by the client, which will negatively affect the security of the connection, so it is recommended to validate the server.

To create and configure the remote connection to a remote access server:

1. Open the Control panel.
2. Click on the name  Network and Internet.
3. Click on the name Network and Sharing Management Center.
4. Click on the name Creating and configuring new connection or network.
5. Click on the name Connection to the workplace. Click on the Next button.
6. If the system already has configured connections, then set the switch to No, create a new connection. Click on the Next button.
7. Click on the line Use my Internet connection (VPN).
8. Enter the address of the server (in the field Internet Address) to which the remote connection will be made. 
9. Enter the name of the remote connection you are creating (in the field Name of the destination object).
10. Check the box Use the smart card and click on the Create button. The remote connection has been created.

To connect to the server:

1. On the Desktop, click on the Network icon in the lower right corner.
2. Click on the link Network parameters.
3. On the left side of the window Settings select VPN.
4. Click on the name of the VPN connection and click Connect.
5. Wait for the operating system to access the Rutoken device.
6. Enter the PIN code of the Rutoken Device User. Click on the OK button.
   
   
7. Wait until the correctness of the secret information stored on the Rutoken device is verified.
8. When you connect for the first, you will receive a request to trust the server. To continue connecting, click on Connect. As a result, the connection will be established.