...

1.  Open the Internet Explorer browser.
2. Click on the Service icon.
3. Select the Browser properties item. 
4. In the window Browser Properties go to the tab Content.
5. Click on the Certificates button. 
6. In the window Certificates check that the required certificate is registered in the local storage (in our example, this is a certificate of the User with a smart card type issued to the Admin user).
7. Click on the certificates line and click on View.
8. Check the certificate details and click on the OK button.
9. In the window Certificates click on the Close button.
10. Connect the Rutoken device to the computer (the device must have an Admin user certificate).
11. Enter the resource address. This example shows the possibility of issuing a certificate via a web form through a secure communication channel with hardware authentication.  
12. In the window for entering the User's PIN code, enter the PIN code and click on the OK button.
13. Wait for the connection setup process to finish. As a result, the connection will be established.
    
    

Configuring the connection to the Terminal Server

For the configuration you need a computer with the Windows 10 operating system and Rutoken drivers installed.

A certificate of the User with a smart card or Login with a smart card type must be installed on the Rutoken device.

The Admin account will be used for remote server management.
  
To configure the connection to the Terminal Server:

1. Open the app Remote desktop connection.
2. Enter the name or IP address of the terminal server. 
3. Click on Show parameters.
4. Go to the tab Local resources. 
5. In the section Local devices and resources click on Show more... 
6. The Smart cards checkbox is selected.
7. Click on the OK.
   If the Rutoken drivers are not installed in the system, this setting is absent from Remote desktop connection.
   
8. In the window Remote desktop connection click on Connect.
9. Enter the PIN code of the Rutoken device User and click on the OK button.
10. As a result, the connection will be successfully established.

If in the snap-in called Active Directory users and computers you set the switch to Smart card is required to log in to the network interactively in the user properties, the user will be able to connect to the server only if there is a Rutoken device with the necessary certificate. It will be impossible to connect to a Remote Desktop using Username and Password.